PETG Filament FormFortura ReForm - rPET available in 8 colors - 3D Printer Filament
ReForm is a sustainable initiative within Formfutura to proactively contribute to making 3D printing more sustainably by reforming post-industrial waste streams into high-end filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
A high-end circular recycled PETG filament made from post-industrial waste
Easy to print
Nearly warp-free and perfect inter-layer adhesion
Good first layer adhesion to a heated glass print bed and many other surfaces
High toughness and dimensional stability
Good chemical resistance
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 110%|
|Print temp: ± 200 - 240° C||Print speed: High||Retraction: Yes ± 6mm|
|Heat bed: ± 65 - 75° C||Fan speed: 0-30%||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.27 g/cc||50 gr coil||1 Kg spool|
|Ø 1.75mm||± 16.4m||± 327m|
|Ø 2.85mm||± 6.2m||± 123m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant with the below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.